Gates and Panels
Triton Barn Systems offers a wide selection of gates and stall panels to meet your individual needs. All stall panels are designed to prevent cribbing or chewing on wood inserts.
All Triton Barn Systems Horse Stalls and Hardware are Hot Dip Galvanized for maximum long term protection and good looks. Hot Dip Galvanizing coats the inside and outside of the metal parts with zinc after welding so the elements never get a chance to come in contact with the steel to cause rust and discoloration.
Rodeo Gates
Rodeo gates are available from 6 feet to 20 feet long. These gates are manufactured using 16 gage tubing with a minimum tensile strength of 50,000 psi. Triton Barn Systems Gates are the choice for strength, safety and durability.
Corral Panels
Corral panels are available in 1 1/2" - 1 3/4" and 2" tubing and lengths from 6 feet to 16 feet long. These panels are manufactured using 16 gage tubing with a minimum tensile strength of 50,000 psi.
- Rolled Top For Snag Free Smooth Tube End
- Permanent drop rods cannot fall out or get lost.
- Tubing bent horizontal at bottom to provide solid footing in soft soil conditions.
- Formed Stiffener on panels over 8ft for superior strength.
- All tube joints cropped and mig welded for maximum strength.
Combo Gate Panels
Combo gate panels are available in 1 1/2" - 1 3/4" and 2" tubing and lengths in 10 foot or 12 foot sections. The combo gate panels are manufactured using 16 gage tubing with a minimum tensile strength of 50,000 psi.
Corral Gates
Triton Barn Systems corral gates are available from 6 feet to 20 feet long. Our gates are manufactured using 16 gage tubing with a minimum tensile strength of 50,000 psi.
Corral Gates are the choice for strength, safety and durability
- Rolled Top For Snag Free Smooth Tube End
- Formed Stiffener on panels over 8ft for superior strength.
- All tube joints cropped and mig welded for maximum strength.
Stall Sweep System
Our stall sweep system is available in 2 inch tubing. Options include: Side Trap, Slide Gates, and Adjustable Alley Gates.
Sections manufactured using 16 gage tubing with a minimum tensile strength of 50,000 psi. Several features make our Sweep Systems the choice for strength, safety and durability.
Triton Barns is your source for Livestock Equipment. All of our hardware and parts have been hot dipped galvanized, which prevents rust and corrosion long term for your products.
No more worrying about replacing your feeders and stall panels every few years, in fact, we even offer a 25 year warranty along with our livestock equipment!